CN
Menu

SC92F8372

Operating Voltage: 2.4V ~ 5.5V

Operating Temperature: -40 ~ 85

Package:

SC92F8372 (SOP20/TSSOP20)

Core: Ultra-speed 1T 8051

Flash ROM: 8 Kbytes Flash ROM (MOVC prohibited addressing 0000H~00FFH) can be rewritten 10,000 times

IAP: Code option into 0K, 0.5K, 1K or 8K

EEPROM: 128 bytes EEPROM can be rewritten 100,000 times. The data written-in has more than 10-year preservation life.

SRAM: Internal 256 bytes + external 128 bytes

System Clock (fSYS):

l  Built-in 24 MHz high-speed RC oscillator (fHRC):

n  as a system clock source, fSYS can choose set by programmer for 12/6/2 MHz

n  Frequency Error: Suitable for 2.9V ~ 5.5V and -20 ~ 85 application environment, no more than ±1%

Built-in 128 kHz LRC Low-speed Oscillator:

l  Available to act as clock source of Base Timer (BTM), which can wake up STOP

l  Available to act as clock source of WDT

l  Frequency Error: 4.0V ~ 5.5V and -20 ~ 85 application environment, no more than ±4% of frequency error after register correction

Low-voltage Reset (LVR):

l  4-level LVR voltage options: 4.3V, 3.7V, 2.9V, 2.3V

l  The default is the Code Option value selected by the user

Flash Programming and Emulation:

l  2-wire JTAG programming and emulation interface

Interruption (INT):

l  Totally 9 interrupt sources, including Timer0, Timer1, Timer2, INT0, INT2, PWM, SSI, Base Timer, TK

l  Two external interrupt vectors shared by 7 external interrupt I/Os, which can be defined in rising-edge, falling-edge or double-edge trigger mode.

l  Two-level interrupt priority capability

Digital Peripheral:

l  Up to 18 two-way independently controllable I/O interfaces, able to configure pull-high resistor independently

l  P0, P2 4-level control drive capability

l  All IOs equipped with sink current drive capability (50mA)

l  11-bit WDT, optional clock division ratio

l  3 standard 80C51 timers: Timer0, Timer1 and Timer 2

l  4 channels common cycle, duty cycle adjustable PWM

l  1 UART/SPI/IIC communication interface (SSI)

Analog Peripheral:

l  16-channel dual mode touch circuit with low power consumption can be configured for high sensitivity or high reliability mode:

n  High sensitivity model to adapt to touch keys from a distance, close to the induction of sensitivity to demand higher touch application

n  High reliability model has very strong anti-interference, can pass the test of 10 v dynamic CS

n  Supporting 16-channels touch keys and derivative functions

n  Development software library support high flexibility and low development difficult

n  Automatic debugging software support, intelligent development

n  When scanning with a single TouchKey in stop mode, the overall power consumption of the chip can be as low as 11uA

Power Saving Mode:

l  IDLE Mode: can be woken up by any interrupt.

l  STOP Mode: can be woken up by INT0, INT2, Base Timer and TK.



Select all
Title Describe Version Language Type Size Updated Download
datasheet V0.1 English PDF 1.91MB 2022-08-15 Download
Select all
Title Describe Version Language Type Size Updated Download
The key points of the MCU PCB design of SailOne touch button MCU are introduced V1.0 English PDF 1.62MB 2023-02-02 Download
Select all
Title Describe Version Language Type Size Updated Download
The key points of using the 92F series products are introduced V1.0 English PDF 1.27MB 2023-02-02 Download
Select all
Title Describe Version Language Type Size Updated Download
selection guide V1.0 English PDF 26.64MB 2024-07-01 Download